Transform your Windows Vista into a Mac OS X Leopard – Part 2

This article continues our series about transforming Windows Vista to a Mac OS X Leopard look with instructions on how to do the following: move the title bar icons from right to left, emulate the MAC OS X ALT-TAB behavior and the dock, install Mac OS X icons, logon screens and boot screens. Once you have finished following all the instructions from this series you will have a Windows Vista which looks and feels very similar to a MAC OS X Leopard.

IMPORTANT: Before starting this procedure you should log on as an administrator. If your user is not administrator, the procedure will fail.

Before starting, it is recommended to create a System Restore snapshot. In case of failure, it will be very easy for you to revert to the initial state.

Also, keep in mind that this tutorial is published with no warranties. We are not responsible for any problems you might have with your system.

Move the title bar icons from right to left with LeftSider

To move the title bar icons from right to left, you need to install LeftSider. You can download the application from here or directly from our site. At the end of this article you will find the direct download link. Extract all files from the archive, then double click on ‘leftsider.exe. If you receive a security warning message, click on Run and the application will start. You will find it in the notification area of your taskbar.

Windows Vista to MAC OS X Leopard

After LeftSider has started, the titlebar’s icons are placed on the left side, just like in MAC OS X Leopard.

Windows Vista to MAC OS X Leopard

If you don’t like how they look, you can change them back with just one click on the LeftSider icon from your taskbar.

There is one small problem with this application: it is set by default not to run at each Windows Vista startup. You have to run it manually each time you logon to your Windows Vista PC. However, you can fix this by adding it to the Startup folder of Windows Vista.

For doing this, search for the word startup in the Start Menu search box. The first result should be a folder called Startup. Open it and then open the folder which contains ‘leftsider.exe.

Windows Vista to MAC OS X Leopard

Right click on the file and select ‘Create shortcut’. A shortcut will be created in the same folder with ‘leftsider.exe.

Windows Vista to MAC OS X Leopard

Move this shortcut to the startup folder by dragging it with the mouse. A pop-up window will appear on your screen saying that you need administrator permissions to move the shortcut to this folder. If you are logged on as an administrator, click on Continue. If not, you might need to provide the administrator password or log on again using an administrator account and repeat the procedure.

After the moving process is finished, LeftSider will start automatically each time you log on to Windows Vista.

Emulate the MAC OS X ALT-TAB behavior with Switcher

Switcher is a very powerful application which allows you to customize the way you switch between windows. With it you can change the ALT-TAB behavior to resemble the one from MAC OS X.

First, download Switcher and install it. During the installation you will receive a security warning message. To continue, click on Run.

Windows Vista to MAC OS X Leopard

After the installation, look for Switcher in the Start menu and start it by clicking on its shortcut.

Windows Vista to MAC OS X Leopard

Open the application and while you are in the window with general settings for Switcher, select the preferred view of the windows. Also, make sure that the ‘Automatically start at logon’ and ‘Show tray icon’ options are checked.

Windows Vista to MAC OS X Leopard

By default Switcher is activated when you press the left Windows key and CAPS LOCK on your keyboard. However, you can replace the default ALT-TAB functionality in Windows Vista with Switcher. To do this, go to the ‘Shortcuts’ tab and click on the Change button.

Windows Vista to MAC OS X Leopard

You will see a list with the two default shortcuts used for Switcher. You can remove them by selecting them and clicking on Remove Shortcut. To make ALT-TAB as the default shortcut for Switcher, click on Add Shortcut.

Windows Vista to MAC OS X Leopard

A new entry called ‘Inactive shortcut’ will be created and selected. Go to the right panel and check the box that says ‘Global shortcut’ then click on the ‘Press shortcut keys’ text box and press simultaneously your Alt and Tab keys.

Windows Vista to MAC OS X Leopard

After you have done this, the ‘Inactive shortcut’ is renamed to ‘Global: Press Alt + Tab’.

Windows Vista to MAC OS X Leopard

When finished, click on OK.

After you are satisfied with your settings, click on Hide and start using Switcher. If you want to know more about what Switcher can do and how to customize it, check out these pages: Switcher Overview and Switcher Questions.

Windows Vista to MAC OS X Leopard

Emulate the MAC OS X dock with RK Launcher

One of the most important visual parts of Mac OS X is the dock. For Windows Vista, the equivalent of the Mac OS X dock is an application called RK Launcher. If you download it from its homepage, you will find it as an archive with no installer. If you use this version you will need to do a lot of customization to make it run automatically and have the options you need.

We managed to find another version published on the Windows Edge forums. You can download it from here. This version comes with an installer which makes the application run automatically at startup. Also, it is preconfigured to include a lot more shortcuts than the version found on the RK Launcher homepage. For this article, we used this version.

Before you install RK Launcher, you have to change the position of the taskbar. It is recommended to do this because, after its installation, the RK Launcher will appear by default on the bottom part of the screen, right were the taskbar is. To change the taskbar position, right click on the taskbar and deselect the ‘Lock taskbar’ option.

Windows Vista to MAC OS X Leopard

Then, drag the taskbar with your mouse to the right side or the upper side of your screen. Personally I recommend you to drag it to the upper side. This way it won’t interfere with RK Launcher.

Windows Vista to MAC OS X Leopard

After doing this, run the ‘RKLauncher(x86).exe’ file and follow the installation steps.

Windows Vista to MAC OS X Leopard

Once installed, the RK Launcher will appear on the lower part of the screen, right where the taskbar was.

Windows Vista to MAC OS X Leopard

The RK Launcher has many settings and customization possibilities. You can configure it in the way you want to, by right clicking on the empty space between icons and selecting Settings.

IMPORTANT: some people reported that RK Launcher has stability issues on some configurations and that it may cause a high processor usage rate. We tested it on two PCs and one of them had issues with high CPU usage. If you have problems with this application it is better to uninstall it and use RocketDock instead. This application is somehow similar to RK Launcher and seems to have less bugs. However, the look and feel is not that similar to MAC OS X.

Install Mac OS X icons

A complete Mac OS experience wouldn’t be possible without the Mac OS X icons. In order to install these icons you need to use an application called IconPackager. Unfortunately, this application is a commercial one and you need to pay $19.95. However, there is a trial version that works for 30 days which can be downloaded from here. You can install this version, load the MAC OS X icons and uninstall it once the trial expires. The icons will remain as you have set them even if you uninstall the application or the trial expires.

After the download has been completed, double click on the ‘iconpackager_public.exe’ file to begin the installation wizard. Finish the installation process and launch IconPackager.

Windows Vista to MAC OS X Leopard

Now, download the Mac OS X icon pack from here. When the download finishes, just double click on the ‘iVista ReFFlective icons.ip’ file.

The IconPackager application will start and import the icon pack. It should be already selected. Now click on the ‘Apply Icon Package’ button.

Windows Vista to MAC OS X Leopard

After a few seconds you should notice the new icons.

Windows Vista to MAC OS X Leopard

How to have a MAC OS X logon screen

If you want to have a logon screen similar to the one from MAC OS X Leopard, download the Vista Leopard logon made by Gazz27.

Windows Vista to MAC OS X Leopard

How to have a MAC OS X boot screen

First you need to download Bootskin, a freeware application that allows you to change the default Windows Vista bootscreen. You can download it from here.
After the download has finished, double click on the setup file, begin the installation process and follow its instructions.

Windows Vista to MAC OS X Leopard

When the installation has finished, launch Bootskin.

Windows Vista to MAC OS X Leopard

The next step is to find an appropriate boot skin which looks like the one from MAC OS X. The nicest ones we have found are: Aqua-Gero Official Bootskin and MacOSX Leopard.

Download the one you like most and extract the archive. Return to Bootskin and select ‘File -> Import from file’.

Windows Vista to MAC OS X Leopard

Browse to the folder where you extracted the boot skin you just downloaded, select the file with the ‘.bootskin’ extension and click on Open.

Windows Vista to MAC OS X Leopard

Once the boot skin has been imported you will receive a notification like the one shown below.

Windows Vista to MAC OS X Leopard

Click on OK and then Apply.

When you will restart your system you will be able see the new boot screen.

The end result

If you have followed the instructions from our tutorials on this topic, your desktop will look similar to the screenshot below.

Windows Vista to MAC OS X Leopard

If you have any other ideas on how to customize your Windows Vista to make it look like MAC OS X Leopard, don’t hesitate to leave a comment.

Related articles:
Transform your Windows Vista into a Mac OS X Leopard – Part 1
Pimp My Windows Vista: How to install new themes
Pimp My Windows Vista: How to change your sound scheme
Use System File Checker To Repair Windows Vista System Files
System Restore

36 thoughts on “Transform your Windows Vista into a Mac OS X Leopard – Part 2”

  1. Switcher
    Thanks for this tutorial!

    I have just one problem with Switcher… Program says that work only with Aero theme, with my Zeus os X leopard Switcher does nothing.

  2. 3 things:
    1- We can use a

    3 things:

    1- We can use a program called TuneUp Utilities (Shareware)
    http://www.tune-up.com/products/tuneup-utilities/
    to install de icons, skins and tune a lot of settings.

    2- The skins don’t work very well with the aero =
    the buttons get too separated and have some bugs at the borders of the windows.

    3- So… after disable the aero we can use Y’z Shadow
    http://www.softpedia.com/progDownload/Yz-Shadow-Download-1330.html
    to get some transparency and really cool shadows… (Don’t forget to use tuneup to turn off menu shadows or they’ll get really dark.)

    thanks for the tutorial!

  3. Bootskin
    Thanks a lot for the tutorial, am almost done… but I have a little problem,
    I can’t find the bootskin for vista, the free version is only for XP. Do I have to purchase object desktop to get the vista version? or I can use the XP version?

    Thanks and hope to get a feedback!

  4. What about icon placement
    Is there any tools for making your desktop icons and shortcuts goto the right side of the monitor vs always newly created on the left. I know you can drag and drop, by turning off auto arrange, but what I’m looking for is when Vista creates a new icon it is auto positioned on the right side of the screen.

    I have a dock on the left side and I’m always having to hide the dock to get to any newly created icons put underneath my dock by the system and drag them to the other side.

  5. in os x, scrolling up and
    in os x, scrolling up and down browser windows is very smooth, almost floaty. is there any way to get windows to do that? (in windows it’s kinda jerky) also when you drag things around in windows, you get a motion blur (can’t read the text) in os x you don’t get a motion blur, and it’s real clean. any way for windows to do this?

  6. Help
    I hav a problem with switcher..i followed all the instructions but whenver i press alt tab my screen just turns black and it comes back whenver i click the mouse…wats the problem?

  7. THANKS
    Thanks a lot dude. You really rock… i was trying to install from an MAC CD bt didn’t work, Tried executing and converting files from mac to windows… throwed some error…

    REALLY APPRECIATE

    REGARDS
    SANDEEP
    SR. SOFTWARE DEVELOPER
    HCL TECHNOLOGIES
    MUMBAI

  8. Leftsider
    Great tutorial!

    The only problem that I have is certain programs do not work with leftsider, while others do. For example, windows explorer switches the buttons to the left side, but mozilla firefox won’t switch. Any ideas about what could be wrong?

  9. Icon Package Installer
    After installing the icon package and loading the icons it worked nicely and then I decided to uninstall it and guess what?
    It took all of the icons with it, they are such a jerks that they had it all planned. Maybe I installed the new version that fixed this. Anyways if you don’t want this to happen to you try to find another self-installer when it comes to packages because these people know what they are doing.

  10. My suggestions
    NOTE for WINDOWS VISTA HOME BASIC USERS:
    why can’t we use glass 2k- application to make taskbar, any maximized/minimized windows transparent cuz aero is not included with vista basic.
    and basic users cannot use switcher because of the unavailability of aero, so why can’t we use topdesk-something similar to switcher(u don’t need aero to use this!) it can even 3D flip!

  11. Problem at startup
    hey look every thing was fine even a restart then i was looking for bootskin for your version like XP when i found it i got and put the bootskin thing mac then i restarted every time i turn it on it takes to me to Startup Repair and it won’t let me do anything i been try to use the computer and now still nothing. found the CMD on the advance thing then there was system restore,Windows Complete PC Restore,Windows Memory Diagnostic Tool,Command Promt aka CMD,and Restore Application. do u know how to fix it pls my Email is [email protected] or [email protected] pls tell me what to do. is it possable that i might have to buy a new Computer or a way to fix it?

  12. BootSkin
    You can also uninstall BootSkin with the mac os x startup screen selected to permanently install the boot skin. If you want to remove it, just install BootSkin again and switch it back to normal.

  13. Kalyway 10.5.2
    I know a better way to get the REAL Mac!
    Just create a partiton in windows and use Kalyway 10.5.2 and install Mac OS X Leopard on that second partition 🙂

  14. Change Boot Screen to Mac OS X
    So I followed all the steps, downloaded the bootskin files. When I click on ‘Apply new BootSkin’, I browse for the bootskin file I want to use(either of the two you provided in the article) and it brings up a message saying that this file is not compatible with this version of the program. Have you had anyone else complain of this and how do I get around this? I noticed once when it was shutting down that it displayed the boot screen but it doesn’t load up and when I try to add it in the BootSkin program, it gives me that message.

  15. I used this site a year ago
    I used this site a year ago to make my computer look like a mac. Unfortunately it crashed, so I had to start over. But now the link for Rocket Launcher is dead? Any way to recover it?

  16. Thanks
    Thanks for the tutorial try adding some of the other comments suggestions and you just pimped up my…
    You just mad my OLD SLOW DELL A FAST NEW DELL MAC! THANKS

  17. Wow!
    I’ve been looking to change my idiotic version of a Mac on Vista…But this?!?! This is life-saving my friend. But I found Icon Packager on YouTube for free. But thanks A LOT! Now my family really thinks I have a Mac. (Minus the power button and the HUGE Apple sticker on the front.)

  18. iVista ReFFlective icons.ip download not working
    The download link to iVista ReFFlective icons.ip is not working for me, i only get a blank screen, ive googled it and got links to the verry same homepage but not the same adress tho, but those dont work either… think you could uppload it to some other website? or maby a direct downlaod here? thx

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.